Описание

Practical and economical optical lenses. Attaches to the inner discs of the mask and glued with water. Positive: +1.25 to +3.00 Size: 3cm Installation instructions 1. Before installation, make sure the mask is cleaned by washing it with detergent and warm water. Step 2: Carefully remove the glasses from the box. Step 3: Soak the glasses in hot water for a minute or more before installation. Step 4: Apply one lens at a time to the bottom of the glass. Step 5: Gently press the lens for a few seconds to remove excess moisture. Step 6: Put on the lens mask to check the correct position. At this time, you can move and adjust the lenses for your specific needs. Step 7: Leave to dry for 1 to 2 hours. Remember that the view through the lenses is slightly blurred until they are completely dry. To remove the lenses, simply use a fingernail and apply some pressure. Note: Rinse your mask after each use and make sure your glasses are not loosened.